ADVERTISEMENT
5. 🧼 Clean the Drain Filter and Pump
Cause: A clogged pump can cause imbalance during the spin cycle.
Fix:
- Open the bottom panel or drain door (usually in front).
- Place a towel and shallow pan — water may spill out.
- Clean out the filter and check for lint, coins, or debris.
🧯 Still Noisy? When to Call a Professional
If you’ve checked all of the above and your washer is still shaking, knocking, or walking across the room, it may be time to:
- Replace drum bearings
- Repair or replace the motor
- Fix internal suspension systems
These are more complex repairs that usually require special tools and experience. If your machine is under warranty, call the manufacturer first.
👚 Final Tip: Prevent It from Happening Again
- Always balance your loads (especially with towels, rugs, and heavy blankets).
- Level your machine after moving it.
- Clean out the pump filter monthly.
- Don’t ignore the shaking — the longer it continues, the more damage it causes.
🧰 In Summary:
Do this before calling a repairman:
- ✅ Balance the load
- ✅ Level the machine
- ✅ Remove shipping bolts (if new)
- ✅ Inspect for worn or loose parts
- ✅ Clean the drain filter
Sometimes the fix is quick and free — all it takes is a little troubleshooting. So before you spend money on a technician, try these steps and give your washer a chance to calm down!
Need a printable checklist or help identifying the parts on your specific washer model? I can help — just ask!
ADVERTISEMENT